+86 371-61653992 sales@laboao.com
Pharmaceutical-specific Closed-loop Spray Dryer Pharmaceutical-specific Closed-loop Spray Dryer
Pharmaceutical-specific Closed-loop Spray Dryer Pharmaceutical-specific Closed-loop Spray Dryer

Pharmaceutical-specific Closed-loop Spray Dryer

The device is especially aimed at organic solvents, and the inert gas medium formed by circulating nitrogen gas is used to replace the usual air medium for spray drying. In addition to recovering products, organic solvents can also be recovered. This set of closed circulation spray system is specially designed for organic solvents with low flash point or slightly toxic characteristics, flammable and explosive characteristics.
  • ModelLBL-DP1/LBL-DP3/LBL-DP5
  • BrandLABOAO
  • PortAny port in China
  • PackagePlywood case package
Request QuotationChat Now
  • Whatsapp

    WhatsApp Chat

  • WeChat

    WeChat Chat

Download

DESCRIPTION

The device is especially aimed at organic solvents, and the inert gas medium formed by circulating nitrogen gas is used to replace the usual air medium for spray drying. In addition to recovering products, organic solvents can also be recovered. This set of closed circulation spray system is specially designed for organic solvents with low flash point or slightly toxic characteristics, flammable and explosive characteristics.

pharmaceutical-specific-closed-loop-spray-dryer-application-scope.jpg

FEATURES

1. Can prevent oxidation, avoid danger and improve quality.

2. Easy to achieve aseptic and dust-free.

3. The solvent in the feed liquid can be recovered.

4. Improve the preservation of aromatic components.

5. It can dry or cool and granulate combustible material liquid.

6. It can dry the material liquid with high heat sensitivity.

7. It can achieve low pollution and no pollution.

8. The deodorizing device can be omitted.

9. It can be dried at a low temperature below 100°C.

10. Using an innovative atomization system, this system uses a hard contact mechanical structure without any gaskets and no leakage. Different from ordinary electric centrifugal nozzles, the superheated corrosive steam contacts the wires of the electric nozzle for a long time under positive pressure, thereby corroding the wires, causing the plastic skin on the surface of the wires to corrode, soften and fall off, thus forming a short circuit. Ultrafine powder in the range of 1-8 microns can be achieved, which is suitable for the preparation of battery materials.

pharmaceutical-specific-closed-loop-spray-dryer-case-compare.jpg

SPECIFICATIONS

Model

LBL-DP1

LBL-DP3

LBL-DP5

Ethanol evaporation

0.8Kg/h

3Kg/h

5Kg/h

Minimum feed amount

50ml

80ml

100ml

atomization structure

Atomization system (NZY1VER2018-1A)

Atomization system (NZY1VER2018-1A)

Atomization system (NZY1VER2018-1A)

Electronic control system

LABOAO closed loop atomization system (BLD-ES-VER2018-1A)

LABOAO closed loop atomization system (BLD-ES-VER2018-1A)

LABOAO closed loop atomization system (BLD-ES-VER2018-1A)

Inlet air temperature (Celsius)

140

140

140

Drying chamber diameter (mm)

300

800

1200

Drying tower height (mm)

600

1200

1500

Explosion-proof disk diameter (mm)

65

65

108

heater capacity

2Kw

6Kw

12Kw

Induced fan [power (kw), air volume (m³/h)]

[1.5, 250]

[2.2, 300]

[2.2, 300]

Compressor [power (kw), air volume (L / min)]

[0.58, 108]

[0.58, 108]

[0.58, 108]

Chiller

50-60Hz (built-in cryogenic cooling circulation   pump)

50-60Hz (built-in cryogenic cooling circulation   pump)

50-60Hz (built-in cryogenic cooling circulation   pump)

Electronic control main accessories standard (including   PLC, analog module, touch screen) (optional)

Wecon   control module (standard)

Wecon   control module (standard)

Wecon   control module (standard)

Selection criteria for electric control auxiliary   accessories (including contactors, etc.) (optional)

Chint   (Standard)

Chint   (Standard)

Chint   (Standard)

Parts in contact with the material (optional)

SUS304   (standard)

SUS304   (standard)

SUS304   (standard)

Exhaust gas reuse, saving energy by more than 30%   (optional)

Not   assembled (standard)

Not   assembled (standard)

Not   assembled (standard)

Atomizing nozzle (optional, diamond coating or not)

SUS304   (standard)

SUS304   (standard)

SUS304   (standard)

Equipment Warranty

1   year (standard, a certain maintenance fee will be charged for the above)

1   year (standard, a certain maintenance fee will be charged for the above)

1   year (standard, a certain maintenance fee will be charged for the above)

Electricity (installed capacity)

4Kw

12Kw

30Kw

Pulse bag filter

PTFE coating material,   2pcs

PTFE coating material,   4pcs

PTFE coating material,   8pcs

Dimensions (mm) (L×W×H) Reference

1400×1000×1600

1800×1200×1800

2100×1200×1800

Installation weight (reference)

200Kg

450Kg

1000Kg

Power supply

380V/-3 (Related voltages can be customized according to   different national standards)

380V/-3 (Related voltages can be customized according to   different national standards)

380V/-3 (Related voltages can be customized according to   different national standards)

Notes

1:   Ethanol evaporation is based on the inlet air temperature of 140°C; 2: If you   need equipment with larger evaporation capacity, please inquire online or   call our company

1:   Ethanol evaporation is based on the inlet air temperature of 140°C; 2: If you   need equipment with larger evaporation capacity, please inquire online or   call our company

1:   Ethanol evaporation is based on the inlet air temperature of 140°C; 2: If you   need equipment with larger evaporation capacity, please inquire online or   call our company


REQUEST QUOTATION

Get Factory Price in 1 Hour?